FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 187)

Management Commands Command Reference
Intelligent Blade Panel Module
186
Global Config
7.5.3.11 show telnet
This command displays the current outbound telnet settings.
Syntax
show telnet
Default Setting
None
Command Mode
User Exec, Privileged Exec
Display Message
Outbound Telnet Login Timeout (in minutes) Indicates the number of minutes an outbound
telnet session is allowed to remain inactive before being logged off. A value of 0, which is the
default, results in no timeout.
Maximum Number of Outbound Telnet Sessions
Indicates the number of simultaneous
outbound telnet connections allowed.
Allow New Outbound Telnet Sessions
Indicates whether outbound telnet sessions will be
allowed.
7.5.4 SNMP Server Commands
7.5.4.1 show snmp
This command displays SNMP community information.
Six communities are supported. You can add, change, or delete communities. The IBP does
not have to be reset for changes to take effect.
The SNMP agent of the IBP complies with SNMP versions 1, 2c, and 3 (for more about the
SNMP specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to
an external SNMP manager based on the SNMP configuration (the trap receiver and other