FUJITSU Primergy Blade Server Systems BX600 - Handbuch (Seite 9)

Information About Boards Important Notes
Intelligent Blade Panel Module 8
1 Important Notes
Store this manual close to the device. If you pass the device on to third parties,
you should pass this manual on with it.
Be sure to read this page carefully and note the information before you
open the device.
You cannot access the IBP Module without first opening the device. How
to dismantle and reassemble the device is described in the Operating
Manual accompanying the device.
Please observe the safety information provided in the “Important Notes”
chapter in the device’s operating manual.
Components can become very hot during operation. Ensure you do not
touch components when handling the device. There is a danger of burns!
The warranty is invalidated if the device is damaged during the installation.
1.1 Information About Boards
To prevent damage to the device or the components and conductors on it,
please take great care when you insert or remove it. Take great care to ensure
that the board is slotted in straight, without damaging components or
conductors on it, or any other components.
Be especially careful with the locking mechanisms (catches, centering pins etc.)
when you replace the board.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are
identifiable by the label shown.
When you handle boards fitted with ESDs, you must, under
all circumstances, observe the following points:
You must always discharge static build up (e.g., by
touching a grounded object) before working.
The equipment and tools you use must be free of static
charges.
Remove the power plug from the mains supply before
inserting or removing boards containing ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with
ESDs.