Sony SIR-3400H - Handbuch (Seite 91)

(E)
14-5 SIR-3400H / SIR-3032i / SIR-3032W
14-4. Repairing Recording Media Discrepancies (RAID Rebuild)
This procedure is used to repair discrepancies in two installed HDDs.
If you try to use a HDD with corrupted data or differences in data, data writing is not performed automatically
even when the HDD is installed. Be sure to always perform the repair operation.
1
Press the F1 key in the Measurement screen.
The Utility screen is displayed.
2
Use the f / F key to select “RAID Rebuild”.
3
Press the key based on the HDD that you want to mirror.
Mirror HDD1 to HDD2 (1 to 2) : F1 key
Mirror HDD2 to HDD1 (2 to 1) : F2 key
A dialog box is displayed for checking that the repair is executed.
<In case that the F1 key is pressed>
4
Press the FWD key while holding down the REC key.
The repair is started.
Once completed, a completion message is displayed.
<To not execute or cancel execution>
Press the F4 key (cancel).
c
If you cancel while the repair operation is in progress, the data in the receiving HDD will be incomplete
and cannot be read.
To exit “RAID Rebuild”, press the F4 key.
14. Execution of Function/Checking