Karcher FS 2000 - Handbuch (Seite 15)

English FS 2000 29
Fault
Pressure in fluid tank decreases
Pressure/cleaning agent loss at
hose or hand gun
Compressor not functioning
properly
Fluid tank defective or severely
dented
Nozzle not spraying evenly
Cause
−
Safety valve open
−
Pressure gauge leaking
−
Hose connections leaking
−
Seals damaged
−
Hose cracked or porous, hand gun
leaking.
−
Mains connection defective
−
Motor protection switch tripped
−
--
−
Nozzle dirty or defective
Solution
Close safety valve
Tighten pressure gauge threaded
connection
Tighten hose connections
Replace seals
Tighten hose connections
Have hose/hand gun replaced by
After-Sales Service or qualified
personnel.
Check mains cable
Check hose and switch connection
Allow motor to cool down for at least
5 min with cover open.
Press in motor protection switch.
Have unit checked by After-Sales
Service if motor protection switch is
repeatedly tripped.
Replace fluid tank
Clean or replace nozzle
Check hose and switch connection
Motor protection switch