Battery led, Monitoring battery capacity – Toshiba T2150CD Benutzerhandbuch

Seite 39

Advertising
background image

connected to the computer and a power outlet.

With the AC power cord connected as described in

Chapter 3, Getting Started

, and the

computer turned off, it takes about 2.5 hours to bring a discharged battery up to full charge.

For details on charging and replacing the main battery, see

Chapter 7, Power and Power-Up

Modes

.

Battery LED

Check the Battery LED on the indicator panel to determine the status of the main battery.
The following lights indicate the battery status:

Flashing orange

The battery charge is low. The AC power cord must
be connected to recharge the battery.

Orange

Indicates the AC power cord is connected and the
battery is being charged with the power off.

Green

Indicates the AC power cord is connected and the
battery is fully charged whether the power is on or off.

No light

Under any other conditions, the LED does not light.

Monitoring Battery Capacity

Battery capacity can be monitored by the Pop-up window when you are working in DOS or
by MaxTime when you are in Windows.

Pop-up Window

The Pop-up window contains a bar gauge that shows how much power remains in the main
battery. Press Fn + F2 or Fn + F3 to display the Pop-up window. The bar, labeled

E

(for

empty) and

F

(for full), is automatically set to full when the battery pack is fully charged. For

details see the Monitoring battery capacity section in

Chapter 7, Power and Power-Up

Modes

.

Battery Save Mode

:

Full Power

E F

Power-up Mode

:

Resume

NOTE

Advertising