Care and cleaning, 1 shelf supports, Removing the shelf supports – AEG BP8715001M Benutzerhandbuch

Seite 27: Installing the shelf supports

Advertising
background image

12. CARE AND CLEANING

WARNING!
Refer to the Safety chapters.

• Clean the front of the appliance with a

soft cloth with warm water and a
cleaning agent.

• To clean metal surfaces use a usual

cleaning agent.

• Clean the oven interior after each use.

Then you can remove dirt more easily
and it does not burn on.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all oven accessories after each

use and let them dry. Use a soft cloth
with warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coat-
ing.

Stainless steel or aluminium ap-
pliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control pan-
el with the same precautions.

12.1 Shelf supports

You can remove the shelf supports to
clean the side walls.

Removing the shelf supports

1.

Pull the front of the shelf support
away from the side wall.

2

1

2.

Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

The rounded ends of the shelf
supports must point to the front.

ENGLISH

27

Advertising