AEG BP8715001M - Handbuch (Seite 29)

Removing the oven door and the glass panels
A 1. Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
B
2. Hold the inner glass B tightly with
both hands and slide it upwards to
remove it from its initial position. Do
the same with the other glass pan-
els.
CAUTION!
Make sure that you tightly hold
the glasses to prevent them from
falling.
Clean the door with a wet sponge and
rub it dry with a soft cloth. Do not use
steel wool, acids or abrasive cleaning
agents because they can damage the
surface.
Installing the door and the
glass panels
When the oven door is clean, install the
glass panels in the opposite sequence.
Make sure that you put the glass panels
back in the correct order.
The first glass panel has a small dot on
the top, the second a black frame. In
some models, the third glass panel has
screen printings. In others, it is transpar-
ent.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the
glass panel frame is not rough when you
touch it.
ENGLISH
29