WolfVision VZ-8light - Handbuch (Seite 3)

Connectors (3):
#1 Camera head
#2 Light
#3 Connectors (on the back)
#4 Working surface
#5 Power on/off key
#6 Light key (also works as White
Balance key if pressed for 3
seconds - see page 5)
#7 Close up lens for camera
#8 Pull ring
#9 Auto focus on/off key
(a light above this key shows
that the auto focus is on)
#10 Zoom keys (if the Zoom keys
are pressed simultaneously with
the Auto fucus key (9) they work
as manual FOCUS keys.
7
9
10
8
3
5
6
2 2 1 1
1 1
ENGLISH
4
Setting up
1. Pull the arm upwards using the special pull ring (#8)
3. Connect the power adaptor to the DC-input (#15).
4. Connect your output unit (projector, monitor, video conferencing
unit etc.) to the appropriate output of the Visualier (#12 or #13).
5. Switch on the Visualizer with the power switch (#5)
2. Turn the camera head (#1) and point it at the working surface
IMPORTANT:
For choosing the right output mode please read the detailled
description on page 3!
Power-on preset:
The power-on preset is automatically activated when switching on the unit. The settings are:
Zoom size approx. 20 x 15 cm (A5), Autofocus on, Autoiris on, top light on.
#11 External input for Computers (see page 3)
#13 USB-port (see page 3)
#15 Power connection 12V #12
#14
#16 RGBHV output (switchable)
Serial control input RS232 (see page 6)
DC-output for lightbox (see page 3)
2
POWER LB RS 232 XGA EXTERN IN USB
11 12 13 14 15 16