WolfVision VZ-8light 2 - Handbuch (Seite 11)

10
A computer can be connected to the External RGB input (#15) of the
Visualizer. With the EXTERN switch (#30 or #44) a user can switch between the
Visualizer image and the image of the external input to be displayed to the audience.
The signal from the computer is only looped through the Visualizer and is not processed
in any way. In order to avoid that your projector or monitor adjusts itself when switching, it
is recommended that you set the output of the computer to the same signal format and
vertical frequency as the Visualizer.
Please note that the image from the External RGB input (#15) can be displayed on the RGB output (#17) only.
1 - T.M.D.S. Data2- 9 - T.M.D.S. Data1- 17 - T.M.D.S. Data0-
2 - T.M.D.S. Data2+ 10 - T.M.D.S. Data1+ 18 - T.M.D.S. Data0+
3 - T.M.D.S. Data2/4 Shield 11 - T.M.D.S. Data1/3 Shield 18 - T.M.D.S. Data0+
4 - T.M.D.S. Data4- (*) 12 - T.M.D.S. Data3- (*) 19 - T.M.D.S. Data0/5 Shield
5 - T.M.D.S. Data4+(*) 13 - T.M.D.S. Data3+ (*) 20 - T.M.D.S. Data5- (*)
6 - DDC Clock 14 - +5V Power 21 - T.M.D.S. Data5+ (*)
7 - DDC Data 15 - Ground (return for +5V, 22 - T.M.D.S. Clock+
8 - Analog Vertical Sync (**) HSync and Vsync) 23 - T.M.D.S. Clock-
16 - Hot Plug Detect 24 - Analog Vertical Sync (**)
*...not used
**...not available
DVI PORT VZ-8plus² only
Anti-theft device 2: table lock bolt
EXTERNAL INPUT - EXTERN
The Visualizer can be fixed with a , so that it
can not be stolen. Follow the instructions from the cable lock manual.
® security cable T-bar lock (Kensington Lock)
Anti-theft device 1: T-bar lock
Pin 24
Pin 8
Pin 1
Pin 9
Pin 17
table
(sectional view)
washer 6.4/17x3
screw M6
115
[4 1/2"]
1
5
6
[6
1
/8
"]
M6
Please note that the usable
depth of thread is 8mm, do not
screw in more than this.
The Visualizer can also be fixed onto a table with the
supplied table lock bolt in order to minimize the risk of
theft.
E 27400
912 6 D )
912 6 D )
Washer DIN 125A 6.4/12x1.6 (D 13770)
7 D )
The thread to fix the bolt is on the bottom of the unit.
Supplied accessories for anti-theft device (part number):
Socket head cap wrench 5mm ( )
Screw DIN , M x35 Zn ( 25260
Screw DIN , M x50 Zn ( 25270
Washer DIN 349 6.4/17x3 ( 13920
Assembly instructions VZ-8² (E 28920)
washer 6.4/12x1.6