WolfVision VZ-8light 2 - Handbuch (Seite 13)

12
Please note, that the PAL/NTSC video outputs (composite and s-video) are switched OFF
by default. This is because the picture quality of these outputs is MUCH LOWER then the
quality of the DVI and RGB outputs, due to the limitations of the PAL/NTSC video
technology. WolfVision wants to prevent that customers accidentally use an output with
lower picture quality as the main image output. If you want to use the PAL/NTSC video
outputs, switch them on with the following key combination:
PAL: Simultaneously press both FOCUS keys (#27) on the camera head and the
Preset 1 key (#33) on the remote control
NTSC: Simultaneously press both FOCUS keys (#27) on the camera head and the
Preset 2 key (#33) on the remote control.
The video outputs can also be switched between PAL, NTSC and OFF in the on-screen
menu.
The USB output of the Visualizer can be used to transfer
images from a Visualizer to a computer and save them in
JPG, TIF or BMP format. This way, Visualizers can also be
used as scanners for 3-dimensional objects.
WolfVision Visualizers are equipped with a fast USB 2.0 port.
This allows uploading images onto a PC in a fraction of a
second.
Connecting slower computers with the older USB 1.1 standard is also no problem. It still
takes only a fraction of the time a desktop scanner requires to scan an image.
WolfVision's USB software works under Windows 98, ME, 2000, XP and Apple Macintosh
and is fully Twain compatible. This is important when using the Visualizer in connection with
popular graphic programs such as Photoshop, or for connecting them to Interactive
Whiteboards (Smart Boards). The fast USB 2.0 port can also output live motion. The
WolfVision USB software can store AVI files and includes a video capture driver. You can
view and save the live image from the Visualizer on your computer in almost every modern
video editing software. Please download the latest version of the WolfVision USB-software
from:
www.wolfvision.com/support.
9-pin D-Sub connector
on unit; male
(front side)
5
9
2
7
3 4
8
1
6
The complete serial protocol can be found on our website under:
www.wolfvision.com/support
The serial port can be used to control the Visualizer through an external device, such as a
room control system that are used to integrate conference rooms.
Please note that ecim odes (=ASCII odes or Hex odes)
must be sent as one single byte (e.g. 199 and not: 1 + 1 + 9) !
Pins: 2: RX, 3: TX, 5: GND
Baud Rate: 9200, 19200, 38400, 57600 or 115200 (selectable)
databits: 8, stopbit: 1, parity: no
The baud rate can be changed in the on-screen extra menu
(see page 13).
d al c c c
PAL/NTSC Video Output VZ-8plus² only
USB Port
RS-232, Serial Control Input