WolfVision VZ-8light 2 - Handbuch (Seite 8)

7
Close-up adaptor lens
For shooting an object outside of the working surface, the close up lens
(#5) has to be
removed. In this case just hinge the lens away from the camera head. It is impossible to
remove the lens completely from the unit and therefore can not get lost.
When using the Visualizer to
record on the working surface, put the close up lens
back to its original position.
again
Turning the camera arm downwards or upwards
In order to enable recordings with illumination outside of the working surface, the camera
arm and also the light of the Visualizer
can be turned vertically.
Image Flip
By turning the camera head to record in
front of the Visualizer, the image will be
automatically turned 180 degrees
(”image flip”). This feature is very useful
for recording the face of the presenter or
objects hanging on the wall behind the
unit.
First make sure that you remove any object from the
working surface (very important!). Then insert a slide in the
slide drawer. The camera automatically recognizes the slide
and focuses on it.
In case the slide is out of focus:
- Make sure that the slide is firmly in place
- Make sure that the ZOOM is not in the maximum
tele position (=smallest picture).
Use the ZOOM-keys/wheel
(#26 or #31).
Slide
to infinity
Shooting Area Outside of the Working Surface
Slide Drawer VZ-8plus² only
up to 45mm
distance from
close-up lens
to the object