WolfVision VZ-C30 Installation - Handbuch (Seite 7)

Mount both stabilization brackets with the enclosed hex safety screws loosely into the corresponding
screw threads (fig. 6). Don’t tighten the screws yet.
Now move the Ceiling Visualizer into unreleased position (fig. 7).
Move the Visualizer into the desired position (fig. 8). Once the position has been found, release the
Visualizer (fig. 9) and tighten the hex safety screws to prevent the unit from detaching and moving
(fig. 10).
Fig.7
Fig.9
Fig.11 Fig.12 Fig.13
Fig.8
All required cables can now be pulled through the opening of the ceiling mount and connected (fig. 11).
Move the Visualizer back into the unreleased position (fig. 12). Make sure that it is completely closed.
You will hear a "click" sound when it is completely closed. (fig. 13).
Lock pin
position
Lock pin
position
Lock pin
position
5
Fig.6
Fig.10