WolfVision VZ-C10 User Manual - Handbuch (Seite 16)

TECHNICAL DATA
Specifications and availability subject to change!
16
All measurements in Millimeters
(for inch see list)
DIMENSIONS
IMPORTANT NOTE:
DO NOT BLOCK COOLING
AIR INLET AND OUTLET
Cooling Air
Outlet
Cooling Air
Inlet
75 75
366 366
R48 R630
332
40
166
392
R1027
36
545
549
49 202
57 90
28 to 36mm
required
for cables
mm Inch
36 1.42
40 1.57
42 1.65
48 1.89
49 1.93
57 2.24
75 2.95
89 3.50
90 3.54
166 6.53
202 7.95
240 9.45
270 10.63
332 13.07
366 14.41
392 15.43
545 21.46
549 21.61
630 24.80
1027 40.43
118 130
42 329
89
240
270
(42)
Camera 1/3" 1-CCD Progressive Scan
Pictures per second (as picked up by the camera) 20
Horizontal resolution (Progressive Scan) 640 lines (820 lines in Image Turn mode)
Vertical resolution (Progressive Scan) 640 lines (820 lines in Image Turn mode)
Total pixels of CCD 840,000
Effective pixel (=pixels which are actually used for
the image information)
1024 x 768
Color reproduction very good colors
Output signals SXGA, XGA or SVGA (switchable); PAL or NTSC (switchable); USB
Vertical image-frequency Progressive Scan: 75 Hz or 60 Hz (switchable), PA L: 50 Hz, NTSC: 60 Hz
Horizontal image-frequency Progressive Scan: 37.3 - 80 kHz, PAL/NTSC: 15.7 kHz
Signal format non-interlaced (Progressive Scan) and interlaced (PAL/NTSC video)
Iris automatic and manual
White balance adjustment automatic and manual
Synchronized lightfield yes (in size of the pick-up area of the built-in camera - for easy positioning of objects)
Text enhancer yes (in color, improves the contrast and the readability of text)
On screen menu yes (for operation functions, camera settings and on-screen help)
Menu reset function yes (user programmable menu setups also available)
Lens / zoom two telezoom lenses (8.5 x optical zoom), f = 20-170mm
Digital zoom (additional to optical zoom) 2 x digital zoom (total: 17 x zoom)
Max. pick-up area on working surface
Depending on mounting height (see page 7)
(in "Image Turn mode" the values for length and height are exchanged)
Min. pick-up area on working surface Depending on mounting height (see page 7)
Max object height on working surface depending on mounting height - 250mm (9.7") minimum
Depth of focus (Depth of field)
depending on mounting height (the higher the better). The following minimum values are always achieved:
70mm (2.75") on smallest pickup-area / 250mm (9.7") on largest pickup-area
Shadow free illumination yes
Illumination of hollow objects yes
Disturbing stray light none at all
Blinding of audience or speaker none at all
Reflection free area whole working surface
Upgradeable firmware yes (updates downloadable from www.wolfvision.com)
USB-software included on CD-ROM (for Windows 98/ME/2000/XP, updates available at www.wolfvision.com)
Light source standard halogen lamp (12V/100W), 3200 Kelvin (constant light spectrum)
Automatic lamp changer yes (with built-in spare lamp)
User programmable presets 3 (plus 8 fixed presets through RS232), Presets for specific functions also available
Special working plate for transparencies yes, supplied with the unit
Image memory 9 pictures (user can select if images should be deleted or not when the power is disconnected)
Show all function displays all 9 images in the memory at once
(High resolution) Image turn mode
all 1024 horizontal pixel lines of the camera are displayed vertically - this improves the resolution of vertical
(Portrait) documents very much
Image rotation 90, 180 or 270 degree rotation possible (90 and 270 degrees with improved resolution)
Alternative image display Negative, Negative/Blue, Black/White
Infrared remote control included (with built-in laser pointer)
Progressive scan outputs RGBHV (2x 15-pin D-Sub and 4x BNC plugs), DVI-I (digital and analogue), USB
PAL/NTSC video outputs (switchable)
S-Video (converted Progressive Scan, 4-pin plug),
Composite Video (converted Progressive Scan, BNC-plug)
Inputs
RGBHV (15-pin D-Sub plug) for PCs (the computer signal can be looped through the Visualizer)
Serial input (RS232) for controlling and firmware updates
Weight 12 kg (25 lbs)
Supplied accessories
Infrared remote control, Ceiling mount, Working plate, Pow er cable, DVI-cable,
Instructions, External Infrared sensor
Optional accessories Lightbox LB-38 (for x-rays and slides, lit area: 430x359mm/ 16.9"x14.1")
Made in Austria (European Community)