PrehKeyTec MC Family - Handbuch (Seite 13)

MC_Manual_V2.doc Page: 13 of 13
6.1.7 Material and surfaces
Housing ABS
Guide frame Polystyrol
Switching membrane Polyester foil
Base plate Steel, zinc plated
Spring elements Elastomer
Ventilation diaphragm Trevira
Key caps Vestodur
Contact mat Silicone rubber
7 Declaration of Conformity
This is to certify that all varieties of statements of compliance exist for MC family.
Of course, you can request us to send you these if you provide the precise type designation (see the product label on the bottom of the device).
PrehKeyTec GmbH
Scheinbergweg 10
D-97638 Mellrichstadt, Germany
Fax: +49-9776 / 7046-299
FCC Warning Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at its own expense.
Copyright
© Copyright PrehKeyTec GmbH 2011
Published by PrehKeyTec GmbH.
PrehKeyTec GmbH reserves the right to update/modify the products described in this manual, as well as the manual itself, at any time without prior notice.
These operating instructions may not be copied, edited, transformed into electronic form or translated into other languages without prior written consent by PrehKeyTec GmbH.
Trademarks
The brand and product names mentioned in these operating instructions are trademarks / registered trademarks of the corresponding owner.
Examples:
Microsoft, Windows, Windows 95, Windows 98, Windows NT, Windows 2000, Windows XP, Windows 7 are registered trademarks of Microsoft Corporation