LumaSense Technologies IN 5-DC-PL2 Ext. PL - Handbuch (Seite 5)

IMPAC-Pyrometer IN 5-DC-PL2
Ext.PL
5
1 Technical data
Measuring range: 0 ... 200°C
Optics: Si lens (see chart)
IR Detector: Thermopile
Spectral response: 8 ... 14 µm (no influence by water vapour or CO
2
)
Output signal: 0 ... 20 mA load independent DC, linear,
galvanically isolated
Internal processing of
measured data : digital
Max load: 500 
Emissivity: 0.95; fixed
Response time (t
90
)*: 250 ms; fixed
Accuracy
**
:
(ε = 1, t
90
= 1s, T
amb.
=constant)
15 ... 30°C: 1 °C
0 ... 15 / 30 ... 45°C: 1.5 °C
45 ... 70°C: 2 °C
Repeatability
**
:
(ε = 1, t
90
= 1s, T
amb.
=constant)
0.5°C
Noise Equivalent Tem-
perature Difference
(NETD):
(ε = 1, = 1, T
amb.=
23°C)
0.1 °C measured temperature = 23°C
Alignment: integrated laser targeting light, class II, total
power <1 mW,
 = 650 nm, focused at 400 mm
Safety system: IP65 (with mounted connector)
Operating temperature: 0 ... 70°C
Storage temperature: -20 ... 70°C
Power supply: 10 ... 30 V DC ripple must be less
then < 0.5 V, 65 mA max. (incl. laser)
Housing: Stainless steel
Dimensions: 104.5 mm x 49.5 mm (LxD)
(length with connector: 153 mm)
Weight: 380 g
Mounting position: any
CE-Label complies with EC rules about electric immunity
Order no.: 3 869 930
Connection cable: A connecting cable is not included with the in-
strument and should be ordered separately
(see 6. Accessories).
* according IEC/TS 62492-1 Edition 1.0 2008-04
** The instrument must be at a constant ambient temperature for a minimum of 15 minutes