Electrolux EHH9967FOG - Handbuch (Seite 10)

• To set the cooking zone: touch
again and again until the indicator of the
necessary cooking zone comes on.
When this function is activated,
comes on.
• To activate the Count Down Timer:
touch of the timer to set the time (
00
-
99
minutes). When the indicator
of the cooking zone starts to flash slow-
ly, the time counts down.
• To see the remaining time: set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with and touch
or .
• To deactivate the Count Down
Time: set the cooking zone with
and touch . The remaining time
counts down to
00
. The indicator of
the cooking zone goes out.
When the timer countdown comes to an
end, the sound operates and
00
flash-
es. The cooking zone deactivates.
• To deactivate the sound: touch .
The Count Up timer
Use the Count Up timer to monitor how
long the cooking zone operates.
• The selection of the cooking zone
(if more than 1 cooking zone oper-
ates): touch
again and again until
the indicator of the necessary cooking
zone comes on.
When this function is activated,
comes on.
• To activate the Count Up timer:
Touch .
The symbol goes out and comes
on.
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows how long the zone has operat-
ed. During the first minute the display
shows the time in seconds, and after
the first minute the display shows the
time in minutes. The display shows the
length of time of the cooking zone
which has operated for the longer peri-
od of time.
• To deactivate the Count Up timer:
set the cooking zone with and touch
or to deactivate the timer. The
symbol goes out and comes on.
When the two Timer functions op-
erate at the same time, the display
shows the Count Up Timer first.
The Minute minder.
You can use the timer as the minute
minder when the cooking zones are not
in operation. Touch
.
Touch or of the timer to set the
time. When the time comes to an end, the
sound operates and
00
flashes.
• To stop the sound: touch .
4.10 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol comes on.
• To deactivate this function touch .
The heat setting that you set before
comes on.
4.11 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
. The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
10 www.electrolux.com