Tuner operation – Kenwood KDC-W7544U Benutzerhandbuch
Seite 17
English
|
17
Tuner Operation
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
Press button
92.1 MHz (FM)
[0], [9], [2], [1]
810 kHz (AM)
[0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Press the [
] button.
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [
] button.
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Press the [
] button.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [
] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Enter Auto Memory Entry mode
Select “AUTO MEMORY”.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Open Auto Memory Entry
Turn the Control knob to select “YES”, and then
press the Control knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
B64-4421-00_00_en.indd 17
09.1.13 4:03:52 PM