Kenwood KDC-W7544U - Handbuch (Seite 4)

AUX
[AUD] [FNC]
[SRC] [ ]
[TI]
[
4 | KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY
General functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward up or down.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner (“TUNER”) , USB or iPod (“USB” or “iPod”),
CD (“CD”) , Auxiliary input (“AUX”), and Standby
(“STANDBY”)
Press at least 1 second to turn off the power.
⁄
• The SRC Select mode can be set in “MENU” > “SRC Select” of
<Function Control> (page 6).
• Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in <Function Control> (page 6) to “ON”.
: Select “MENU” > “Built in AUX”
• When an optional accessory is connected, the source name
for each device appears.
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle’s battery. The time until full power OFF can be set in
“Power OFF” of <Function Control> (page 6).
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
• USB (iPod) source is recognized as CD source on the
connected unit.
Volume control: [AUD] knob
Turn the knob to adjust the volume.
Subwoofer output: Control knob
Switches between ON (“SUBWOOFER ON”) and OFF
(“SUBWOOFER OFF”) each time pushing toward down
for at least 2 seconds.
• You can do this function when “SWPRE” in <Function
Control> (page 6) is set to “SW”.
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the setting made in “MENU” >
“AUX” of <Function Control> (page 6).
Text/Title scroll: Control knob
Scrolls the CD and audio file text display when
pushing toward up for at least 2 seconds.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
48).
Function Control : [FNC]
Pressing this button allows you to set various
functions using the Control knob. Refer to <Function
Control> (page 6).
Category Function of setup item
MENU Allows you to set up the environment.
SETUP Allows you to set up the display and color.
SOUND Allows you to set up the sound environment.
BT Allows you to set up the Bluetooth function.
— Allows you to set up the each source function .
Favorite Control : Control knob
You can recall the various registered functions by
turning the Control knob.
Basic Operation
Release
Auxiliary
input
Microphone
USB Terminal Control
knob
B64-4421-00_00_en.indd 4 09.1.13 4:03:42 PM