Kenwood KDC-W7544U - Handbuch (Seite 31)

English | 31
Preset position selection
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Compensation seat Range
Not compensating. “ALL”
Front-Left seat “Front-Left”
Front-Right seat “Front-Right”
Front seat “Front”
1 Enter Preset position setting mode
Select “SOUND” > “Control” > “Position” >
“Preset Position”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the seat you want to compensate
Turn the Control knob.
3 Exit Preset position setting mode
Press the [FNC] button.
Manual position setting
Making fine adjustment of the value specified at
Preset position selection per speaker.
1 Enter Manual position setting mode
Select “SOUND” > “Control” > “Position” >
“Manual Position”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Item Setting overview
“FRONT” / “L” Front Left speaker
“FRONT” / “R” Front Right speaker
“REAR” / “L” Rear Left speaker
“REAR / “R” Rear Right speaker
“SUBWOOFER” / “L” Subwoofer Left
“SUBWOOFER” / “R” Subwoofer Right
“INITIAL” Initialize the setting values.
Push the Control knob towards up or down.
3 Set the value
Turn the Control knob.
Adjust between 0 and and 170 cm.
Press the Control knob for at least 1 second if you
want to execute the “INITIAL”.
4 Exit Manual position setting mode
Press the [FNC] button.
B64-4421-00_00_en.indd 31 09.1.13 4:03:54 PM