Festo Генератор вакуума OVEM, дюймовый - Handbuch (Seite 88)

OVEM
88 Festo ć OVEM ć 1004b English
6.3.2 Set the switching reaction of the switch outputs
Fig. 14: Set switch outputs (menu structure EDIT mode è Fig. 24: )
Note
The sequence for setting the switch outputs Out A (A button) and Out B (B button) is
basically the same. For Out B the switch output In A1 must also be set because Out B
can also be configured as a diagnostic output (è chapter 8.2 Diagnosis).
The sequence is described below taking the example of switch output Out B.
The vacuum generator is in the EDIT mode and [Out A] flashes.
· Proceed as follows in order to set Out B:
1. Press the B−button (DOWN button).
è [Out B] flashes.
2. Press the EDIT button in order to confirm the selection.
è In A1 is displayed.
3. Press the EDIT button in order to confirm the selection.
è The currently set switching function flashes.
4. Select the desired switching function (threshold value/window comparator)
with the UP/DOWN button.
5. Press the EDIT button in order to confirm the selection.
è [SP] or [SP] [
min
] flashes.