AEG BE7004001M - Handbuch (Seite 13)

7. CLOCK FUNCTIONS
7.1 Clock functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance.
You can also activate it when the appliance is off.
Use to activate the function. Press
or to
set the minutes and OK to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
and End Time ,
the appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Press a sensor field to stop the sig-
nal.
• With Duration
and End
Time you must set the
heating function and the tem-
perature first. Then you can set
the clock function. The appli-
ance deactivates automatically.
• You can use Duration
and
End Time at the same
time if you want to automati-
cally activate and deactivate
the appliance at a given time
later.
• When you use the Core tem-
perature sensor (if applicable),
the Duration
and End
Time functions do not op-
erate.
7.2 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate
the function in the Basic Set-
tings menu.
• Conditions for the function:
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
ENGLISH
13