AEG BE7004001M - Handbuch (Seite 31)

13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not heat up. The clock is not set. Set the clock.
The appliance does
not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The appliance does
not heat up. The Child Lock is activated. Refer to "Deactivating the
Child Lock".
The appliance does
not heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
The appliance does
not heat up. The automatic switch-off is
activated. Refer to „Automatic
switch-off“.
The display shows
an error code that is
not in this list. There is an electrical fault. • Deactivate the appliance
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Steam and conden-
sation settle on the
food and in the ap-
pliance. You left the dish in the ap-
pliance for too long. Do not keep the dishes in
the appliance for longer
than 15 — 20 minutes after
the cooking ends.
The display shows
F111. The CT Sensor plug is not
correctly installed into the
socket. Put the plug of core tem-
perature sensor as far as
possible into the socket.
The lamp does not
operate. The lamp is defective. Replace the lamp.
ENGLISH
31