4 technical data - electrical ratings (sinewave), 5 technical data - mechanical design, Technical data - electrical ratings (sinewave) – Baumer MHAP 200 Benutzerhandbuch
Seite 27: Technical data - mechanical design
MB221T1 - 11105054
Baumer_MHAP200-T1_II_DE-EN (14A4)
24
8
8.4
Technical data - electrical ratings (sinewave)
• Voltage supply (Signals):
P...D:
4,5...30 VDC (SinCos)
• Consumption w/o load:
≤300 mA
• Sinewave cycles per turn:
1...16384 (As ordered)
• Phase shift:
90° ±5°
• Sensing method:
Magnetic
• Output signals:
A+, A-, B+, B-
• Output stage:
SinCos 1 Vpp
• Difference of SinCos amplitude:
≤20 mV
• Harmonics typ.:
-40 dB
• DC offset:
≤20 mV
• Bandwidth:
400 kHz (-3 dB)
8.5
Technical data - mechanical design
• Sensor head:
FPGA signal processing
• Size (flange):
ø203.1 mm
• Shaft type:
ø50...180 mm (through hollow shaft)
(As
ordered)
• Axial tolerance:
±1 mm (wheel/head)
• Radial tolerance:
0.1...0.5 mm (wheel/head)
• Protection DIN EN 60529:
IP 67 (head)
IP
68
(wheel)
• Operating temperature:
-20...+85 °C
• Operating speed:
≤4000 rpm
• Resistance:
IEC
60068-2-6:2007
Vibration 30 g, 55-2000 Hz
IEC
60068-2-27:2008
Shock 300 g, 2 ms
• Accuracy of magnetic measure:
±200 ″
• Connection:
Flange connector M23, 17-pin