Salter Brecknell LP-250 Series - Handbuch (Seite 26)

3.4 Setting Ethernet by Diagnostic Utility (Option for LP-250
model)
The Diagnostic Utility is enclosed in the CD disk \Utilities directory
. Users can use Diagnostic Tool to setup the Ethernet by USB and
Ethernet interfaces. The following contents will instruct users how to configure the Ethernet by
these interfaces.
3.4.1 Using USB interface to setup Ethernet interface
1. Connect the USB cable between the computer and the printer.
2. Turn on the printer power.
3. Start the Diagnostic Utility by double clicking on icon.
Note: This utility works with printer firmware V6.00 and later versions.
4. The Diagnostic Utility default interface setting is USB interface. If USB interface is
connected with printer, no other settings need to be changed in the interface field.
5. Click on the
“
Ethernet Setup
”
button from
“
Printer Function
”
group in Printer Configuration
tab to setup the IP address, subnet mask and gateway for the on board Ethernet.
20