Salter Brecknell LP-250 Series - Handbuch (Seite 43)

6. Maintenance
This session presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab (Head cleaner pen)


Lint-free cloth

Vacuum / Blower brush
100% ethanol

2. The cleaning process is described as following:
Printer Part Method Interval
Print Head
1. Always turn off the printer before cleaning
the print head.
2. Allow the print head to cool for a minimum
of one minute.
3. Use a cotton swab and 100% ethanol to
clean the print head surface.
Clean the print head when changing a
new label roll
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and a
cotton swab, or lint-free cloth.
Clean the platen roller when changing
a new label roll
Note:

Do not touch printer head by hand. If you touch it careless, please use ethanol to clean it.
37
As needed
Tear Bar/Peel Bar
Use the lint-free cloth with 100% ethanol to
wipe it.
Sensor Compressed air or vacuum Monthly
Exterior Wipe it with water-dampened cloth As needed
Interior Brush or vacuum As needed