FRITSCH PULVERISETTE 7 premium line - Handbuch (Seite 54)

3 General Safety
3.1 General
This workshop manual is intended for personnel technically qualified to
install, operate and maintain the above mentioned Fritsch Numbers /
Items. It contains all the necessary information for correct maintenance
of the above mentioned Fritsch Numbers / Items. The contents of this
workshop manual are not contractual and cannot under any circum‐
stance extend or restrict contract warranty clauses.
3.2 Qualification of personnel
Only qualified personnel are authorized to install, operate or maintain
the above mentioned Fritsch Numbers / Items. Any work performed by
an unqualified person or failure to follow the safety instructions in this
document or on the equipment may risk the safety of personnel and/or
cause irreparable damage to equipment. The following personnel may
be regarded as being "Qualified":
n Personnel who are trained and experienced in the adjustment and
repair of Fritsch equipment (for example, installation engineers, post
sales service en‐gineers, etc).
3.3 Conformity of use
The products described in this workshop manual conform to the Euro‐
pean Directives to which they are subjected (CE marking). However, they
can only be used correctly in the context of the applications for which
they are intended (described in the various documents). If all handling,
transport and storage specifications are observed, and all instructions for
installation, operation and maintenance are followed, the products will
perform properly, with no danger to personnel or equipment.
3.4 Maintenance
It is imperative to observe the following rules when maintenance for the
equipment has to be carried out.
n Safety instructions must be followed. These instructions are in the
documentation or on the equipment being installed and set up.
n Always remove power before performing any operation on equip‐
ment.
n Before the equipment is powered up, check its nominal voltage to
ensure that it has been adjusted to conform with the local supply
voltage.
n All measures must be taken to ensure that any power return does
not lead to a dangerous state which may risk personnel or the instal‐
lation.
General Safety
‐ 54 ‐