VACUUBRAND Digital Interface - Handbuch (Seite 12)

Seite/page 12 / 19
Das Dokument darf nur vollständig und unverändert verwendet und weitergegeben werden. Es liegt in der Verantwortung des
Anwenders, die Gültigkeit dieses Dokumentes bezüglich seines Produktes sicher zu stellen. BA-Nr.: 999221 / 27/05/2009
Documents are only to be used and distributed completely and unchanged. It is strictly the users’ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999221 / 27/05/2009
Technical Data
We reserve the right for technical modification without prior notice!
Typ Analog Interface Digital Interface
Housing fixation DIN top hat rail
Dimension 9 x 88 x 58 mm 3
Connections screw clamp 0.5 - 2.5 mm 2
Input 0 - 10 V
> 5 VDC
> 5 VAC
(galvanically separated)
Input impedance 10 kOhm 1 - 16 kOhm
Max. input voltage 60 VDC -
Output
0 - 10 V
potential free semiconductor
relais
(galvanically separated)
Max. output current 30 mA -
Resolution input 10 mV -
Resolution output 2.5 mV -
Max. switching voltage -
60 VDC
40 VAC
Max. switching current - 2.5 A
Supply via VACUU-BUS TM 24 VDC
Max. current draw 50 mA 5 mA
Possibilities of configuration
with CVC 3000:
- vacuum output as analog
voltage 0-10 V
- set vacuum input and
vacuum output as analog
voltage 0-10 V
- frequency output as ana-
log voltage 0-10 V
- set frequency input and
frequency output as ana-
log voltage 0-10 V
with CVC 3000 or DCP 3000:
- fault indicator module
- remote (start - stop) module
- end module
- valve adapter module
Factory setting
analog vacuum output as
analog voltage 0-10 V
fault indicator module