Livarno Energy-Saving Ceiling Lamp - Handbuch (Seite 20)

20 GB
Introduction / Safety
Energy-Saving Ceiling Lamp
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. Carefully read these
operating instructions all the way through. Fold out
the page with the illustrations. These instructions are
part of the product and contain important informa-
tion on placing the product in service and on how
to handle the product. Always comply with all safety
instructions. Prior to placing the device in service,
check whether the correct voltage is present and
that all parts have been properly mounted. Should
you have any questions, or if you are uncertain how
to operate the device, please get in touch with your
dealer or service centre. Please keep these instruc-
tions in a safe place and hand them on to a third
party if necessary.
Intended use
This luminaire is only suitable for indoor use, in dry
and enclosed rooms. The luminaire can be fastened
to all normally inflammable services. This device is
intended for use in private households only.
Scope of delivery
Immediately after unpacking, check that the scope
of delivery is complete and that the device is in
faultless condition.
1 Ceiling luminaire, model 3940-052L (5-light)
5 Energy-saving bulbs E14, 9 W
5 Lamp lenses
1 Remote control unit
1 Battery, 12 V , 23 A
2 Dowels
2 Screws
2 Ceiling holder clips
2 Screws (ceiling holder clips)
1 Tool
1 Set of operating instructions
Description of parts
1 Mounting bracket with slotted holes
2 Screws
3 Mains connection (external)
4 Terminal block
5 Receiver
6 Connection housing
7 Lamp arm
8 Spot
9 Remote control unit
10 Ceiling holder clip
11 Ceiling holder
12 Bulb socket
13 Lamp lens
14 Threaded ring
15 Tool
16 Bulb
Technical data
Ceiling luminaire:
Operating voltage:
230–240 V∼, 50 Hz
Energy-saving bulbs: 220–240 V∼, 9 W, E14
Rated power, maximum: 5 x 9 W
Protection class:
I
Remote control receiver:
Rated voltage:
220–240 V∼, 50 Hz
Max. load capacity 1000 W
Frequency: 433.92 MHz
Remote control transmitter:
Operating voltage:
12 V , 23 A
Frequency: 433.92 MHz
Safety
Safety instructions
Damages due to failure to comply with these ope-
rating instructions will void the guarantee! We assume
no liability for consequential damages! We assume
no liability for material damage or personal injury
Safety / Preparation