Silvercrest SKRI 2000 A1 - Handbuch (Seite 53)

50
Handling and operation
SKRI 2000 A1
GB
Activating the settings menu
To activate the settings menu, in the mode clock/standby operation press the
button Mode / Lock
11 or the button Mode Lock 45 on the remote control. The
time of day, shown in the display , begins to blink. Each further actuation of
the button Mode / Lock 11 or 45 switches to the next setting potential. The menu
item sequence is:
Setting the time of day ▯
Setting the date ▯
Setting the memory function ▯
Set the Update Mode ▯
Switch display dimmer on/off ▯
Set display dimmer start time ▯
Setting the time of day format ▯
NOTICE
The setting menu ends automatically if you do not actuate any buttons for ►
approx. 15 seconds. The executed setting(s) is/are saved.
Setting the time
Prerequisite: The appliance is in the operational mode clock/standby operation.
Press the button Mode / Lock ♦ 11 or the Mode Lock button 45 on the remote
control once. The time of day indicator begins to blink.
Using the buttons ♦ / Up 17 and i i / Down 19 or the / Up 42 and
/ Down buttons 32 on the remote control, set the current time. With each
press on the button the time of day changes by one minute. Holding the
respective button down for more than 2 seconds starts the speed setting.
Press the button Mode / Lock ♦ 11 , or the Mode Lock 45 button on the remote
control, once again to save the current setting and move on to the next
menu item.
NOTICE
The time of day will revert back to ► if the appliance is disconnected
from the mains power supply and no battery is inserted or if the battery is
too weak.
IB_63920_SKRI2000A1_LB1.indb Abs3:50 17.01.2012 11:15:23 Uhr