Siemens Industrial Ethernet Scalance X005 - Handbuch (Seite 55)

Installation and Maintenance
5.5 Grounding
5.5 Grounding
Installation on a DIN Rail
The device is grounded over the DIN rail.
S7 Standard Rail
The device is grounded over its rear panel and the neck collar screw.
Wall Mounting
The device is grounded by the securing screw in the unpainted hole.
Please note that SCALANCE X005 must be grounded over one securing screw with
minimum resistance.
If the device is mounted on a non-conducting surface, it is required to install a grounding
cable. The grounding cable is not included in the delivery. Connect the unpainted surface of
the device to the next grounding point via the grounding cable.
Industrial Ethernet SCALANCE X005
Commissioning Manual, A2B00051528A
5-5