Philips DMR-EH60 - Handbuch (Seite 6)

6
RQT8203
Inserting, Removing the SD card
Only insert or remove the SD card after turning the unit off.
When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card’s contents.
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB ( ➡ 11).
≥If you have an LCD/plasma television or LCD projector
Using progressive output, you can enjoy high-resolution video
recorded on media such as DVD-Video. Connect this unit’s
component video output terminals to your television and turn on the
progressive output setting (
➡ 16, 20).
≥If you have a regular television (CRT: cathode ray tube)
Use component output with progressive “Off” (Factory setting
➡ 57),
even if it is progressive compatible, because progressive output can
cause some flickering. This is the same for multi system televisions
using PAL mode.
Opening the cover Inserting the card
(Do not forget to close the cover. ➡ right)
Removing the card Closing the cover
Press down.
ADAPTER
If you are using a
miniSD
TM card, insert it
into the miniSD TM card
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Press on the centre of the
card until it clicks into
place.
Insert the card label up with
the cut-off corner on the right.
1
2
Press on the centre of
the card.
Pull it straight out.
Push up.
Note to owners of progressive compatible PAL system televisions
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
Progressive output
6
In
s
e
rt
in
g
, Remo
vin
g
t
h
e S
D
ca
rd
/
No
te
t
o
o
w
n
e
rs
o
f p
ro
g
ressi
ve c
o
mp
at
ib
le P
A
L
sys
te
m t
e
le
v
isio
n
s
EH60.book Page 6 Monday, June 27, 2005 8:46 PM