Philips DMR-EH60 Benutzerhandbuch
Seite 67
67
RQT8203
Play (Continued)
Page
Edit
Still pictures
To reset this unit
Alternative soundtrack and
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menus to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make changes.
—
No subtitles.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.
—
Angle cannot be changed.
≥Angles can only be changed during scenes where different angles are recorded.
—
You have forgotten your ratings
password.
You want to cancel the ratings
level.
≥The ratings level returns to the factory preset. While the disc tray is open, press [DVD] then
press and hold [
¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more
seconds (“INIT” will appear on the unit’s display).
—
Quick View does not work.
≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
—
—
The resume play function does
not work.
≥This function only works when the indicator on the right appears on the unit
display.
≥Memorized positions are canceled when the unit is turned off or when the
tray is opened. The memorized position on the playlist is also canceled when
the playlist and title are edited.
—
—
The Video CD picture does not
display properly.
≥When connecting to Multi-system TV, select “NTSC” in “TV System” in the SETUP menu.
≥When connecting to PAL TV, the lower part of the picture cannot be displayed correctly during
search.
61
—
Time Slip does not work.
≥Time Slip does not work when the unit’s “TV System” settings are different from the title
recorded on the disc.
61
HDD
REC
REC
REC
PLAY
PLAY
REC
DVD
SD
PC
C
Cannot format.
≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that you may not be able to use in this unit.
9, 10
Cannot create chapters.
Cannot mark the start point or
the end point during “Partial
Erase” operation.
≥The unit writes the chapter division information to the disc when you turn it off or remove the
disc. The information is not written if there is an interruption to the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point before a
start point.
—
—
—
Cannot erase chapters.
≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer.
39
The available recording time
doesn’t increase even after
erasing recordings on the disc.
≥Available recording space on the DVD-R and +R does not increase even after erasing
previously recorded titles.
≥Disc space on a DVD-RW (DVD-Video format) increases only when the last recorded title is
erased. It does not increase if other titles are erased.
—
—
Cannot create a playlist.
≥You cannot select all the chapters at once in a title if the title also includes still pictures. Select
them individually.
—
Cannot display Direct Navigator
screen.
≥This screen cannot be displayed during recording or transfer (dubbing) or while the unit is
standing by for linked timer recording with external equipment.
—
Cannot edit or format a card.
≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message
sometimes appears on the screen even when protection has been set.)
50
The contents of the card cannot
be read.
≥The card format is not compatible with the unit. (The contents on the card may be damaged.)
Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.
≥The card contains a folder structure and/or file extensions that are not compatible with this
unit.
≥Turn off and then turn on the unit again.
51
11
—
Transferring (dubbing), erasing
and setting protection takes a
long time.
≥When there are a lot of folders and files, it may sometimes take a few hours.
≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time. Format
the disc or card.
—
51
To return all the settings other
than the main ones to the factory
preset
≥Select “Yes” in “Shipping Condition” in the SETUP menu. All the settings except for the
ratings level, ratings password and time settings return to the factory preset. The timer
recording programmes are also cancelled.
≥Select “Yes” in “Default Settings” in the SETUP menu. All the settings other than the
programmed channels, time settings, country settings, language settings, disc language
settings, ratings level, ratings password, remote control code, return to the factory presets.
≥Press and hold [X CH] and [CH W] on the main unit until the Country setting screen appears.
All the settings except for the ratings level, ratings password and time settings return to the
factory preset. The timer recording programmes are also cancelled.
—
To reset the ratings level
settings
≥While the disc tray is open, press [DVD] then press and hold [¥ REC] and [1] (PLAY) on the
main unit at the same time for 5 or more seconds.
—
To restore the unit if it freezes
due to one of the safety devices
being activated
≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.)
—
67
EH60.book Page 67 Monday, June 27, 2005 8:46 PM