Zanussi ZCV6602MW - Handbuch (Seite 20)

5. Pull the door trim to the front to remove it.
6. Remove the glass panels.
1
2
1
To install panels follow the procedure in re-
verse.
Caution! The removable glass panels
have a marking on one side. Make sure
that the marking is in the top left corner.
Oven lamp
Warning! There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass cov-
er.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Removing the drawer
The drawer below the oven can be removed for
cleaning.
1. Pull the drawer out until it stops.
1
2
2. Lift the drawer at a small angle and remove
it from the drawer support rails.
Inserting the drawer
1. Set the drawer on the support rails. Make
sure that the catches engage correctly into
the rails.
2. Lower the drawer until it is horizontal and
push it in.
Warning! When the oven is in use, heat
can build up in the drawer. Do not keep
flammable things in there (e.g. cleaning
materials, plastic bags, oven gloves, paper,
cleaning sprays, etc.).
What to do if…
Warning! Refer to the Safety chapters.
20
www.zanussi.com