AEG 40095VD-MN - Handbuch (Seite 11)

Display Description
/ / OptiHeat Control (three-step residual heat indicator):
continue cooking/keep warm/residual heat.
The Lock / The Child Safety Device operates.
Not correct cookware or too small cookware or no
cookware on the cooking zone.
The Automatic Switch Off operates.
5.3 Activating and
deactivating the hob
Touch for 2 seconds to activate the
hob. Touch for 1 second to deacti-
vate the hob.
5.4 Heat setting
Touch the necessary heat setting on the
control bar. Change to the left or right, if
necessary. Do not release before you
have the correct heat setting. The dis-
play shows the heat setting.
5.5 Bridge function
The Bridge function connects two cook-
ing zones and they operate as one.
First set the heat setting for one of the
cooking zone.
To start the Bridge function for left/right
side cooking zones touch
/ . To
set or change the heat setting touch one
of the left/right control bars.
To stop the Bridge function touch
/
. The cooking zones operate inde-
pendently.
5.6 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1. Touch ( comes on in the dis-
play).
2. Immediately touch the necessary
heat setting. After 3 seconds
comes on in the display.
To stop the function change the heat
setting.
1
2
3
4
5
6
7
8
9
10
11
12
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
5.7 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10
minutes at most. After that, the induc-
tion cooking zone automatically changes
back to the highest heat setting. To acti-
vate, touch
. comes on in the dis-
play. To deactivate, touch a heat setting
- .
5.8 Power management
The power management divides the
power between two cooking zones in a
pair (see the illustration). The Power
function increases the power to the max-
imum level for one cooking zone in the
pair and decreases the power in the sec-
ond cooking zone. The display for the
reduced zone changes between two lev-
els.
ENGLISH
11