Lenze Cam Designer Professional getting started - Handbuch (Seite 67)

Cam Designer Professional
L
65 Cam Designer Professional DE/EN 2.0
5.3 Curve Mode
In Curve Mode, all defined objects are combined to a complete cam.
• The connections are generated to ensure a movement as smooth as possible under
consideration of physical laws.
• Furthermore it is checked whether it is possible to have movement transitions without turning
points. This is possible if all acceleration values are either positive or negative. If necessary,
lines are added to the polynomials.
• The acceleration values for the basic elements Reversal (R) and Movement (M) are set for a jerk
as small as possible.
• It is not possible to edit automatically generated objects in Curve Mode. However, you can
select individual objects and copy them to the Object Input Mode, where they can be edited.
The time derivations for velocity, acceleration and jolt are indicated in the lower section of the window.
Use the arrow keys to switch between the individual derivations .
Show/Hide Bookmarks