Retsch EasySieve - Handbuch (Seite 13)

General Notes
13
The program directory software selected during installation has the easysieve.exe
and easysieve.hlp software. The …\SIEVESYS and ….\SIEVEDAT sub-directories
are stored in the program directory too.
In the SIEVESYS sub-directory the program stores the following files:
task files
*.afg (internal format)
sieve stack files *.gkl (internal format)
reference files *.ref (ASCII format)
Files in ASCII format (*.ref) can be presented as reference curves at the same time
as the sieve curves in the diagram and serve to generate the adjustment files.
In the SIEVEDAT sub-directory further sub-directories are created, whose names
are decided in the individual sieving tasks. The following sieving files are stored in
these sub-directories:
•
*.rdf Raw data files (raw data in the internal format)
• *.xle EXCEL decimal point, English (measurements table - EXCEL D
decimal point English, configurable, optional)
• *.xld EXCEL decimal comma, German (measurements table in EXCEL
decimal comma, configurable, optional)
• *.ccg RETSCH file format (ASCII format, optional)
After installation RETSCH.afg (first sieving task) and RETSCH.gkl ( sieve stack file
for the standard Retsch sieve stack) are in \SIEVESYS. SIEVEDAT has a
\RETSCH sub-directory with a RETSCH_001.rdf sieving.
Pos: 4.7 /00005 Überschriften/1.1 Ü berschriften/1.1 Ü berschriften BDA/11 Siebaufg abe erstellen @ 1\mod_1254124097320_9.doc @ 14666 @ 2 @ 1
4.2 Creation of a sieving task
Pos: 4.8 /00020 BD A Software/20010 EasySieve Kapitelsammlung/0003 EasySieve Allgemei ne Hinweise zu Easy Si eve/0304 EasySieve Modul Si ebaufgabe erstellen @ 1\mod_1254124140101_9.doc @ 14674 @ @ 1
A sieving task file contains all the EasySieve program settings required for the
sieving and to show the results of a particular type of material. These settings are
stored in the *.afg task file. This task file contains:
All sieving parameters
−
the log texts defined for the task
− directory, file name and file number for the result files
− The name of the associated sieve stack file in which the limits desired for the
evaluation are stored.
− information on which result files are to be created
− the density [g/cm³] of the material
− settings in the measurement table
− settings in the measurement diagram
− settings for calculating characteristics
− settings for the trend analysis
At the point of time of the commencement of a sieving there must be at least one
sieving task file and the associated sieve stack file.
An existing sieving task can be edited in the “Sieving Analysis”– “Edit sieving task”
menu item. Then all the windows in which the essential parameters for
measurement and presentation can be set are opened one after another (“Next”
key). The sieving task is stored at the end of the procedure.