Retsch EasySieve - Handbuch (Seite 38)

Main Window - Description of the Menu Items
38
If “µm” was selected, all values are displayed as µm and all inputs are interpreted
as µm. Otherwise all sizes are specified in mm.
The following possibilities exist for quickly allocating the sieve sizes:
Reading the sieve stack file:
Reading an existing sieve stack file *.gkl
Creating:
The limits of the sieving series R5, R10, R20/3, R40, R40/3, ASTM Mesh,
Tyler Mesh are set as desired between Xmin and Xmax.
In the free text window on the right side a sieve stack file can be edited freely. The
individual mesh aperture sizes, separated by a space, are entered for this purpose.
Inputs can be sequenced at will. The “update” key sorts the mesh aperture sizes in
order of size. A maximum of 16 sieve sizes are possible.
If the sieving series was derived from ASTM Mesh or Tyler Mesh, it is only possible
to delete individual classes or to reintegrate previously deleted ASTM or Tyler
Mesh classes.
The following are optional entries:
Upper limit:
Upper grain size limit of sieving
Lower limit:
Lower grain size limit of sieving
Both variables are entered into the graphical evaluation only.
Sieve stack properties:
The properties of the individual sieves can be viewed in this menu item.