Retsch EasySieve - Handbuch (Seite 29)

Main Window - Description of the Menu Items
29
this is that the tare weights and the sieve load are inputted completely depending
on the selected sieving machine.
Input of the sieve weights after finishing sieving with AS 200 control, AS 200
Tap, AS 300 control, AS 400
control or AS 450 control:
At the end of the sieving process the cursor moves to the “sieve weight” input field
for the coarsest sieve. Now one after another, from coarse to fine, the sieving back
weights must be transferred or entered with the sample material remaining on the
sieves. If the value transferred is lighter than the corresponding tare weight, a fault
alarm is given.
Input of the sieve weights after the end of sieving with AS 200 jet:
At the end of the respective sieving process the cursor moves to the “sieve weight”
input field for the respective sieve, from fine to coarse.
After the input of each value the calculated fractions are displayed.
Once all values have been inputted, the evaluation can be started by clicking on
the “Evaluation “ button, whereby the files defined in the sieving task (*.rdf; optional
*.xle, *.xld, *.ccg) are written and opened evaluation windows are updated. When
sieving is conducted with the AS 200 jet sieving machine in accordance with the
“Swiss procedure”, information appears once the “evaluation” key is pressed that
the calculation is based on an averaged weight of all fractions used for sieving.
In addition, a check is run through for agreement between the total sieving residue
and the inputted gross weight. A warning is given if the differences are > 2%.
Pos: 5.30 /00005 Ü berschriften/1.1.1 Ü berschriften/111 N eue Siebaufgabe @ 2\mod_1260180940116_9.doc @ 17750 @ 3 @ 1
5.3.2 New sieve task
Pos: 5.31 /00020 BDA Softwar e/20010 EasySieve Kapitelsamml ung/0004 EasySi eve H auptfensters/04151 EasySieve M odul N eue Siebaufgabe @ 2\mod_1260181189014_9.doc @ 17771 @ @ 1
Use this command for the quick generation of a new sieving task. All setting
windows required to configure the sieving task are run through. No pre-
initialisations by other sieving tasks are used.
By inputting a “file name”, you can quickly pre-initialise the name of the sieving
task, the sieve stack file, the file directory for the sieving task and the names of the
individual sieving files.
Once all sieving parameters have been set, you can start the sieving if you wish.
Pos: 5.32 /00005 Ü berschriften/1.1.1 Ü berschriften/111 Siebaufg abe bearbeiten @ 2\mod_1260180997079_9.doc @ 17757 @ 3 @ 1
5.3.3 Edit Sieve Task
Pos: 5.33 /00020 BDA Softwar e/20010 EasySieve Kapitelsamml ung/0004 EasySi eve H auptfensters/04152 EasySieve M odul Siebaufg abe bear beiten @ 2\mod_1260181288491_9.doc @ 17778 @ @ 1
The currently loaded and most recently executed sieving task is opened for editing.
All setting windows required for editing the sieving task are run through (“Next”
key).
Pos: 5.34 /00005 Ü berschriften/1.1.1 Ü berschriften/111 Siebaufg abe l aden @ 2\mod_1260181075697_9.doc @ 17764 @ 3 @ 1
5.3.4 Loading the Sieving Task
Pos: 5.35 /00020 BDA Softwar e/20010 EasySieve Kapitelsamml ung/0004 EasySi eve H auptfensters/04153 EasySieve M odul Siebaufg abe l aden @ 2\mod_1260181755844_9.doc @ 17785 @ @ 1
From a list of all previously set up sieving tasks a set of parameters can be loaded
for the sieving to be conducted. After confirmation by pressing the “start …” key,
the “start sieve analysis” window appears in which the header data of relevance to
the following sieving can be edited. When the “Edit …” key is actuated, the “Sieving
Parameters” window opens and the pending sieve analysis can be edited in this
window.
Fig. 12: Load sieve task
Pos: 5.36 /00005 Ü berschriften/1.1.1 Ü berschriften/111 Siebaufg abe speichern @ 2\mod_1254143031445_9.doc @ 16416 @ 3 @ 1