Yamaha CVP-20 - Handbuch (Seite 2)

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
See bottom of keyboard enclosure for graphic symbol markings
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “danger­
ous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral tri­
angle is intended to alert the user to the presence
of important operating and maintenance (servic­
ing) instructions in the literature accompanying
the product.
IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS
INFORMATION RELATING TO POSSIBLE PERSONAL INJURY, ELECTRIC SHOCK, AND FIRE HAZARD
POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
— When using electronic products, basic
precautions should always be followed,
including the following:
I Read all Safety and Installation Instructions, Explanation of
• Graphical Symbols, and assembly instructions (where applica­
ble) BEFORE using your Yamaha electronic product. Check unit
weight specifications before you attempt to move this instrument!
2 Main Power Supply Verification: Your Yamaha electronic
• product has been manufactured specifically for the main supply
voltage used in your area. If you should move, or if any doubt exists,
please contact your dealer for instructions. The main supply voltage
required by your electronic product is printed on the name plate. For
name plate location, see Before Playing item.
3 This product may be equipped with a polarized line plug (one
• blade wider than the other). If you are unable to insert the plug
into the outlet, contact an electrician to have your obsolete outlet
replaced. Do NOT defeat the safety purpose of the plug. Yamaha
products not having polarized plugs incorporate construction
methods and designs that do not require line plug polarization.
4 WARNING — Do NOT place objects on your electronic
• product’s power cord or place the unit in a position where anyone
could trip over, walk over, or roll anything over cords of any kind. Do
NOT allow your electronic product or its bench to rest on or be in­
stalled over cords of any type. Improper installations of this type cre­
ate the possibility of a fire hazard and/or personal injury.
5 Environment: Your electronic product should be installed away
• from heat sources such as a radiator, heat registers and/or other
products that produce heat. Additionally, the unit should not be locat­
ed in a position that exposes the cabinet to direct sunlight, or air cur­
rents having high humidity or heat levels.
6 Your Yamaha electronic product should be placed so that its loca-
• tion or position does not interfere with its proper ventilation.
7 Some Yamaha electronic products may have benches that are
• either a part of the product or supplied as an optional accessory.
Some of these benches are designed to be dealer assembled. Please
make sure that the bench is stable before using it. The bench supplied
by Yamaha was designed for seating only. No other uses are recom­
mended.
8 Some Yamaha electronic products can be made to operate with or
• without the side panels or other components that constitute a
stand. These products should be used only with the components sup­
plied or a cart or stand that is recommended by the manufacturer.
9 Do not operate for a long period of time at a high volume level or
• at a level that is uncomfortable. If you experience any hearing loss
or ringing in the ears, you should consult an audiologist.
1A Yamaha electronic product near water or in
XU»
wet environments. For example, near a swimming pool, spa, or
in a wet basement.
11
. Care should be taken so that objects do not fall, and liquids are
not spilled, into the enclosure through openings.
^ /y Your Yamaha electronic product should be serviced by a quali-
X.Z>» fied service person when:
a. The power-supply cord or plug has been damaged: or
b. Objects have fallen, or liquid has been spilled into the product: or
c. The product has been exposed to rain: or
d. The product does not operate, exhibits a marked change in perfor­
mance: or
e. The product has been dropped, or the enclosure of the product has
been damaged.
/y When not in use, always turn your Yamaha electronic product
XJ» “OFF’ ’. The power-supply cord of the product should be un­
plugged from the outlet when it is to be left unused for a long period
of time. Notes: In this case, some units may lose some user
programmed data. Factory programmed memories will not be af­
fected.
Do not attempt to service the product beyond that described in
the user-maintenance instructions. All other servicing should
be referred to qualified service personnel.
14.
y
_ Electromagnetic Interference (RFI). This series of Yamaha
XD. electronic products utilizes digital (high frequency pulse) tech­
nology that may adversely affect Radio/TV reception or the operation
of other devices that utilize digital technology. Please read FCC Infor­
mation (page67) for additional information.
PLEASE KEEP THIS MANUAL
FOR FUTURE REFERENCE!