Eneo VKC-1382/IR-316 - Handbuch (Seite 31)

3
Function Description
COLOR DAY/NIGHT is disabled and camera operates in DAY mode.
B/W DAY/NIGHT is set to NIGHT mode and camera removes the optical filter outputs B/W video.
Colour burst signal can be programmed to be output or removed (OFF).
AUTO DAY/NIGHT is enabled and automatically switches along with the object luminance.
Colour burst signal can be programmed to be output or removed at NIGHT mode.
EXTERN DAY/NIGHT operation is controlled by an external circuitry.
Must set to EXTERN for this camera.
NOTE: The OSD key does not work for 3 seconds when switching to Colour or B/W.
5.8.1 DAY/NIGHT AUTO SETUP
This menu is NOT effective when DAY/NIGHT is set to EXTERN.
Function Description
BURST MODE Enables or disables the colour burst signal for the B/W video.
COLOR –> B/W DURATION
BW –> COLOR DURATION Determines the transition speed of ICR.
DWELL TIME Delays the switching for 5s, 7s, 0s, 5s, 0s, 30s, 40s, 60s between DAY and
NIGHT to avoid an intermittent switching by the short luminance changes.