Xerox 6100 - Handbuch (Seite 169)

Repacking the Printer
Repacking the Printer 7-13
Repack the Printer
If you need replacement packaging, in the United States, call MINOLTA-QMS Spares
at (251) 633-4300 extension 2530 and request catalog number 2600439-500. In loca-
tions outside the United States, refer to the
Service & Support Guide or www.minolta-
qms.com.
Before packing the printer and strapping it to a pallet, verify that the actions described
in the following list have been completed.
Checklist

Item Should be... Additional actions
RMA number/label Received Before shipping, place the RMA label
clearly on the outside of the box.
Repacking kit, pallet, strap-
ping and buckling supplies Acquired, if
necessary
Top and front covers Opened If you have a duplex unit installed,
open its top cover before opening the
printer’s top cover.
OPC belt cartridge Installed
Cables Removed
Media tray(s) Removed
Toner cartridges Removed
Fuser oil bottle Removed Fuser oil remover syringe used to
remove the oil, and paper towels
inserted to absorb any residual oil
Cleaning roller Removed
Fuser tension release levers In forward
position
Waste toner bottle Replaced New waste toner bottle installed
Duplex unit Removed
Lower feeder unit(s) Removed
Top and front covers Closed
Printer Bagged