Xerox 6100 - Handbuch (Seite 38)

32-bit SuperDriver Setup
magicolor 6100 DeskLaser User's Guide 2-12
1st Page
Paper Graphic
The paper graphic image will change according to Paper Size, Orientation and
Duplex/Booklet selections, and will display the selected N-up setting.
Duplex/Booklet
Purpose This list allows you to identify the paper source for the first page of the
document.
Choices Upper Tray
Optional (1 or 2)—available only on printers with one or two lower feeder
units installed.
Default Upper Tray
Notes This list is disabled (grayed-out) if Different Paper for 1st Page is disabled, or
if there are no lower feeder units installed.
Purpose Allows you to specify whether and how your print job will be duplexed.
Choices None
Long Edge—Prints flipped horizontally on the long edge as in a loose-leaf
notebook.
Short Edge—Prints flipped vertically on the short edge as on a clipboard.
Booklet Left Binding—Orients faces (2-up) with binding (fold) on left. Use
this option for booklets designed to be read right to left.
Booklet Right Binding—Orients faces (2-up) with binding (fold) on right. Use
this option for booklets designed to be read left to right.
Default None
Notes Duplex/Booklet options are supported only on printers with a duplex unit
installed and the duplexer option selected on the Device Options tab.
Duplex/Booklet options are only available when Plain Paper is the Media
Type.
Printing with booklet binding produces four faces of print on each duplexed
sheet of media (2-up on each side of the media). The faces are arranged so
that when the media is folded, the page ordering is booklet style.
To use Booklet Left Binding or Booklet Right Binding, the N-up option (on the
Page Layout tab) must be Off.