Xerox 6100 - Handbuch (Seite 58)

Loading the Media
Cassette
magicolor 6100 DeskLaser User's Guide 3-4
Loading the Media Cassette
This section discusses loading the media cassette with paper. If you’re using another
type of media, refer to “Using Media Other Than Paper” on page 3-7 for information.
Paper Specifications
Prepare the Paper
1 Take a stack of about 250 sheets (½ ream).
» Note: Don’t unwrap the paper above the printer as this might cause paper
particles to fall into the printer.
2 Holding the stack with one hand, fan the
paper with the other.
This gets air through the sheets and prevents
static buildup.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
Input Cassette Universal or optional Letter/A4
Capacity 250 sheets of 20 lb bond (75 g/m²) paper; capacity for other
weights varies accordingly
Type


Any standard or recycled office paper suitable for plain-paper laser printers,
such as
– Hammermill Laser Print


Letterhead/memo paper
Weight


Plain paper, 16–24 lb bond (60–90 g/m²), thick stock 24–43 lb (90–163 g/m²)
Print Mode


Automatic (Plain Paper)
Duplexing


Duplexing is supported only on plain paper and limited thick stock. Supported
up to 28 lb (105 g/m²). See “Duplex (2-Sided) Printing” in chapter 4,
“Advanced Printer Operations.”
Notes We do not recommend using perforated or prepunched paper.
You should test any stock thicker than 24 lb (90 g/m²) to ensure that its
performance is acceptable.