Xoro HRS 8600 CI - Handbuch (Seite 81)

HRS 8600 CI 17
Engl
ish
Connection
7. If the CAM module is seated correctly,
then you can not push further.
8. After properly inserting the CAM module
disengages the eject button. CAM module
and key are on the same level.
Notes:
1.
Follow the instructions of the
manufacturer of CAM module (Common
Interface) and subscription card.
2. Carefully slide the module into the slot.
Ejection of the module
Press the eject button next to the CAM module up to the attack. The CAM module is pushed a little
bit. Now you can pull the CAM module out of the bay.
Connect the USB flash drive carefully on to the
USB port. In general the label should show the
USB stick to the top.
Remove the USB stick only when you are back in
Live program, otherwise the drive could be
damaged.
Notes:
1.
Due to legal requirements of CE-conformity, the customer is asked to only connect USB-
Sticks to the USB port.
2. The USB port can be supported up to 16 GB flash memory size. In order to the many different
USB-Sticks and the build-in electronics components a support of all USB-Sticks can not
guaranteed.
3. Please format the USB-Sticks only with FAT 32 file system. Other file systems are not
supported and can not recognizes by the USB port.
4. Save all data’s from the USB memory before you connect to the device.
Common Interface
USB port