AEG 43036IW-MN - Handbuch (Seite 20)

9. OVEN - CLOCK FUNCTIONS
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be
used at the same time, if the
oven is to be switched on and off
automatically later. In this case
first set Duration
, then End
.
9.1 Setting the clock functions
1. Activate the appliance.
2.
Use again and again until the
display shows the necessary clock
function and the related symbol, for
example Minute Minder
.
3.
Use or to set the necessary
time.
When the time is completed, an
acoustic signal sounds for 2 minutes,
and “00.00” and the related function
indicator flash. The appliance deacti-
vates.
4. Press a button to stop the acoustic
signal.
With Minute Minder , you
must activate the oven to set the
clock function.
With Duration and End ,
the oven deactivates automati-
cally. You must set the oven func-
tion and the temperature first be-
fore you can set the clock func-
tion.
9.2 Heat+Hold (if applicable)
The Heat+Hold function keeps prepared
food warm for 30 minutes after the cook-
ing is completed.
Activating Heat+Hold
1. Set the time with the clock functions
Duration
and/or End .
2. Use Selection again and again
until the display shows the symbol
Keep warm
.
3.
Press and the display shows
“00:30”.
4. When the set oven function is com-
pleted, a signal sounds and Heat
+Hold starts. The set oven function
operates at 80°C for 30 minutes. The
oven then deactivates automatically.
The temperature for the set oven
function must be above 80°C.
10. OVEN - HELPFUL HINTS AND TIPS
WARNING!
Refer to the Safety chapters.
20 www.aeg.com