AEG 43036IW-MN - Handbuch (Seite 34)

Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with an ap-
plicable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.
11.5 Replacing the oven lamp
1. The oven lamp is on the left side of
the oven cavity. Remove the left
shelf rail for access to the lamp.
2. Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov-
er. Clean the glass cover.
3. If necessary, replace the oven lamp
with an applicable 300 °C heat-re-
sistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf rail.
11.6 Removing the drawer
The drawer underneath the oven can be
removed for easier cleaning.
Removing the drawer
1. Pull the drawer out as far as possi-
ble.
2. Lift the drawer slightly, so that can
be lifted upwards at an angle of the
drawer guides.
Inserting the drawer
To instal the drawer follow the proce-
dure in reverse
WARNING!
When the oven is in use, heat can
build up in the drawer. For this
reason, do not keep flammable
things in there such as e.g. clean-
ing materials, plastic bags, oven
gloves, paper, cleaning sprays,
etc.
12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
34 www.aeg.com