Xoro HRS 8900 Hbb+ - Handbuch (Seite 63)

19
7.4 EPG-Timer (Timer programming via EPG)
In Single- or Multi-EPG Mode you can pre-programme a recording. Only if you
have connected an external USB Hard-Disk-Drive, these programmes can be
recorded. Use the Navigation keys to choose the desired programme and press
the record key (REC key with the red dot).
An additional window is opened which
displays the timer reservations. If a
HDD is connected the recording will
be made accordingly to the connected
external HDD. If a HDD is not
connected the receiver will switch to
the according channel at the
programmed time
Please note: Should two timer reservations overlap, and error message will be
displayed. You then need to change or delete one of the two reservations. Use
the CURSOR UP and CURSOR DOWN keys to move to the reservation you
want to change and either delete a reservation with the RED key or change the
start or duration time using the GREEN key.
7.5 Teletext
Teletext application can be activated deactivated by pressing the TEXT (BLUE)
key. The following operations are supported after activating Teletext:
• After activating text page 100 will appear after a short time.
• Specific Teletext pages can be selected using the number keys. If the Teletext
page is currently not available, the last selected page will remain on the screen.
• The next Teletext page can be selected with the CURSOR UP key.
• The previous Teletext page can be selected with the CURSOR DOWN key.
7.6 PVR Function
When connecting an external Hard-Disk-Drive to the USB port, the Receiver can
be used as a PVR (Digital Video Recorder). During recording you have the
option to watch another channel provided it’s on the same Transponder. The
channels which are thus available during recording are highlighted in white