Xoro HRS 8900 Hbb+ - Handbuch (Seite 77)

33
12.1 Record List (Timer)
A Timer is used to program the
Receiver to switch on and off again at
certain times and to tune to a specified
channel. Timers are normally used to
record a TV Program on the video
recorder or to pre-program the
receiver for other reasons (i.e. wake-
up). A set timer causes the receiver to
wake up from standby mode at the
specified time or change the channel
to the specified one.
Please note: Timer settings that have been programmed in the EPG (see EPG-
Timer point 7.4) are automatically marked in the Timerlist as “Recording“ and can
be edited (GREEN) or deleted (RED) here.
In the Record List Submenu, please press YELLOW – ADD to manually add an
Event to the timer.
If an external HDD is connected to the
USB port and is operational,
recordings can be made directly on
the HDD. Please enter:
- Date
- Start Time
- Stop Time
- Channel List (TV / Radio)
- Channel
- Mode (Once / Daily / Weekly)
Save the newly set Recording Event by pressing the BLUE key.
When leaving the Timer Menu confirm the question „Save changes?“ with
„Yes“ (press the OK key)
Playback of previously recorded programmes: Press the key FILE LIST on your
Remote Control and open the Directory „My Record“. Choose the recording you
wish to play back.