WolfVision VZ-9plu - Handbuch (Seite 17)

16
Anti-theft device 2: table lock bolt
The Visualizer can be fixed with a , so that it
can not be stolen. Follow the instructions from the cable lock manual.
® security cable T-bar lock (Kensington Lock)
Anti-theft device 1: T-bar lock
slot for lock
The Visualizer can also be fixed onto a table with
the supplied table lock bolt in order to minimize
the risk of theft.
Please note that the usable depth of thread is
8mm, do not screw in more than this.
Supplied accessories:
1x Socket head cap wrench 5mm (101684)
1x Allen screw driver 2,5mm (101685)
1x Screw M8x35 (101686)
1x Screw M8x50 (101687)
2x Washer 8.4/16x1.6 (100527)
1x Assembly instructions VZ 9plus (101688)
turntable
attachment
area
1
6
8
m
m
(
6
.6
”)
160mm (6.3”)
2
1
Lock Turntable
Remove the screw from the hole position 2 and
insert it into the specific hole position 1 (the
turntable might have to be turned until the thread
is visible).
Use supplied Allen screw driver (2,5mm).
table
(sectional view)
washer 8.4/16x1.6
screw M8x35 or
screw M8x50
The software (firmware) of your Visualizer (including the o ) can easily be
upgraded to the latest version. The firmware update can be done via USB, Ethernet (LAN)
or RS232.
Firmware update files can be downloaded for free at www.wolfvision.com/support.
Updates via USB or Ethernet/LAN can be made with the WolfVision Connectivity Software,
updates via RS232 can be made with WolfVision's Firmware Update Utility. Both tools can
also be found under the same link as the firmware files.
n-screen HELP
Firmware Upgrades