WolfVision VZ-9plu - Handbuch (Seite 7)

6
#32 ZOOM keys
The ZOOM keys work like the ZOOM WHEEL on the camera head of the Visualizer. Using
the ZOOM keys (wheel) also switches auto iris on again (see page 9).
#33 LASER POINTER key
Warning: Do not stare directly into the laser beam!
This is hazardous for your eyes!
#34 PRESET keys (programmable settings)
For storing a preset, press one of the PRESET keys for more than 2 seconds. For recalling
a preset, press the PRESET key quickly (see page 9).
#35 IMAGE TURN mode key
For picking up vertical (portrait) pages with higher resolution (see page 11).
#36 SNAP SHOT key
Pressing this key activates the SNAPSHOT function (see page 10).
#37 AUTO FOCUS (AF) key
Switches the auto focus on and off (see page 9).
#38 Manual FOCUS keys
When the FOCUS keys are pressed the Visualizer switches off the autofocus function. The
next time the AF-key is pressed, autofocus is switched on again.
#39 VIEW (ALL) key
For displaying all 9 pictures of the memory as split image (see page 10).
#40 FREEZE key
Freezes the current image. The FREEZE light indicates if the FREEZE-mode is activated.
#41 Manual IRIS keys (brightness adjustment)
When the IRIS keys are pressed, the Visualizer switches off the Auto iris function. The next
time the ZOOM keys/wheel are used the auto iris is switched on again.
For specialists: The overall iris level can be changed in the on-screen menu (see page 14).
#42 SELECT keys (double function of MEMORY keys)
For navigating through the on-screen menu (see page 14).
#43 MEMORY keys 1 - 9
For saving and recalling pictures (see page 10).
#44 HELP/RESET key for on-screen menu (double function of MEMORY keys)
While you are in the on-screen menu you can activate the on-screen help by pressing the
number 5 key. Pressing this key for 2 seconds resets the selected menu item (see page14).
#45 ENTER key (double function of MEMORY keys)
Same function as the right SELECT key (MEMORY key No. 6).
#46 EXTERN key / MENU key
This switches between Visualizer image and external input (see page 11).
Pressing this key for 1 second activates the on-screen menu (see page 14).
#47 POWER key
Pressing this key switches the unit on and off. When switching on the unit, the Visualizer
runs the power-on preset.
#48 LIGHT key
Switches the light on and off.
Available on Visualizers with serial number lower than 1008038 only.
Infrared Remote Control (#6)